E3 Designers can do all of the following and more for you and your projects. In addition to engineering deliverable documents such as schematics, artwork files and bills of materials - we take pride in creating and maintaining superb documentation and records for your projects.

Engineering Software

  • Altium Designer

    • Altium PDN Analyzer

  • SolidWorks Premium 2021

  • SolidWorks Electrical 2021

  • Hyperlynx SI GHz

    • Pre and Post Layout Analysis

    • DDR2/DDR3/DDR4 Automated Compliance Simulation

    • IBIS-AMI Sweeps

    • SERDES Channel Compliance (PCIe, USB3.0/3.1, 1/10/35/40/100 Gbit Ethernet)

    • Fast and Statistical Eye Modeling

  • Ansys Electronics Desktop

    • HFSS

    • HFSS 3D Layout

    • siWave

  • Mentor Graphics PADS Professional VX.2.7

  • OrCAD Capture and OrCAD PCB Professional 17.2

  • LTSpice

  • LTpowerCAD

  • NI LabView

  • MATLAB

RF Engineering

  • Radar system & sub-system design for ADAS including SAR systems and signal processing

  • Analysis, design & test of antennas including microstrip patches, wire, reflector, waveguide antennas

  • Analysis, design & test active & passive RF components

    • Filters, amplifiers, combiners/splitters

  • Hands on experience in assembly, fabrication, calibration, test and measurement equipment and

    setups for RF circuits, antenna anechoic chambers and optical setups

  • CAD algorithm development for computational electromagnetics, parallel computing and numerical techniques including FEM, FDTD, MOM, hybrid methods and Model Order Reduction techniques

  • Professional familiarity with many popular programming, modeling and simulation tools

Schematic Capture and Circuit Design

  • Microcontrollers/Microprocessors/SoC/DSP

    • Intel Cyclone V SoC

    • Xilinx Zynq MPSoC

    • Xilinx Zynq 7000 series

    • TI TMS320

    • Atmel SAM

    • Microchip PIC/dsPIC

    • NXP iMX7

    • NXP RT MCUs

  • FPGA/CPLD

    • Intel Cyclone IV

    • Intel Cyclone V

    • Intel MAX 3000A

    • Intel MAX10 hardware design

    • Xilinx Virtex UltraScale+ HBM

    • Xilinx Kintex UltraScale+

    • Xilinx Spartan-6

    • Xilinx Spartan-7

    • Xilinx Artix-7

    • …and more hardware design experience

  • High Speed Serial Communications

    • JESD204C (32 Gbps)

    • 100GBASE-KR4 (25.78125 Gb/s)

    • 10GBASE-KR (10.3125 Gb/s)

    • PCIe Gen 2 (5.0 Gb/s), Gen 3 (8 Gb/s) and Gen 4 (16 Gb/s)

    • USB 3.0/3.1 (10 Gb/s)

    • Aurora LVDS (8 Gbps)

    • SERDES (8 Gbps)

  • Standard Embedded Communications Interfaces

    • Triple Speed Ethernet (1 Gb/s)

    • I2C/I2S/SPI/UART

    • RS232

    • RS422

    • RS485

    • CAN/CAN-FD

    • USB 2.0

  • High Speed Clock Tree Design and Fanout

    • Supporting PCIe and multi-gigabit networking standards

  • Memory

    • LPDDR4

    • DDR4

    • DDR3/DDR3L

    • LPDDR2

    • SDRAM

  • Embedded Flash Memory

    • Raw NAND

    • eMMC

    • SPI Flash/QSPI Flash

    • EEPROM

    • SRAM

    • FRAM

  • Power Management

    • Supercapacitor Backup Power Systems

    • DC-DC Converters (discrete controller implementation and monolithic device use)

      • Buck, Boost, Buck-Boost

      • LDO

      • Charge Pump Inverters

    • AC-DC (24VAC) Power Conversion

  • D/A and A/D Converters

    • Analog Signal Chain Analysis and Design

    • Sensor Signal Conditioning

  • Pump, Relay and Solenoid Drive

    • Contactors, SSRs, Mechanical Relays

  • System Level Wiring and Interconnect

  • Symbol Creation

PCB Layout

  • HDI Layout Experience for high tech designs

    • Multiple blind/buried vias, sequential lamination steps, microvias

    • Up to 26 layer design experience

  • Low Cost Layout Experience

    • 4 Layer PCB design for low-cost target products

  • DFx Experience

  • Routing

    • High Speed Layout Experience

    • DDR 2/3/4

  • Footprint Creation

  • Design for EMI/EMC

Electrical System Design

  • Component Integration

    • Power Supplies

    • Pumps, fans, motors

    • Custom PCBs

    • Circuit Protection Devices

    • Power Distribution

    • PLC Systems

  • Cable and Harness Design

  • DFx

  • Designed for Compliance

Embedded System Design, Development and Debug

  • Concept creation, Pugh matrix style weighting for informed decision making

  • Creation and collaboration to define interaction layers between hardware, firmware and application software

  • Bring-up of designs - ours or yours - debug of embedded hardware and firmware is one of our specialties

Debug, Test and Measurement Hardware and Software

  • LeCroy WavePro 735zi Oscilloscope

    • Jitter Kit, Spectrum Analyzer

    • USB and Ethernet Packages

    • 1/1.5GHz Active Probes (ZS/1000ZS1500)

    • 1GHz Active Differential Probes (ZD1000)

    • 30A/50MHz Current Probe (CP030A)

    • 4GHz Differential Probe System (D410-A-PS)

  • FLIR ETS320 Infrared Camera

  • Rigol MSO1074Z Oscilloscope

  • Test Equity 105 Half Cube Temperature Chamber

  • Agilent E4407B 26.5GHz Spectrum Analyzer

  • Agilent 34460A, HP 3478A, Fluke 287 and Fluke 87 RMS Multimeters

  • Rigol DP832, HP3610A, BK Precision 1685 and BK Precision 1550 Lab Power Supplies

  • HP 6645A High Voltage DC Power Supply

  • Tenma 72-7675 Programmable AC Power Supply

  • Valhalla 2100 Power Analyzer

  • Rigol DL3021 DC Electronic Load

  • Rigol DG1022z Arbitrary Function Generator

  • BK Precision 4011A Function Generator

  • Agilent 34970A Data Logger

  • Omega CL510A RTD Simulators

  • Omega CL3515R Thermocouple Calibrator/Simulator

  • Saleae Logic Analyzer

  • Total Phase Aardvark I2C/SPI Host Adapter

  • Total Phase Beagle USB 2.0 Analyzer

  • FlashForge Creator Pro 3D Printer